Por favor, use este identificador para citar o enlazar este ítem: https://dspace.unl.edu.ec/jspui/handle/123456789/14649
Título : Susceptibilidad a deslizamiento en la vía de integración barrial, sector Menfis central hasta el barrio Obrapia.
Autor : Tambo Encalada, Walter Simón
Castro Mendoza, Luis Estalin
Palabras clave : <TOPOGRAFÍA> <GEOLOGÍA> <GEOFÍSICA> <SUSCEPTIBILIDAD A DESLIZAMIENTOS> <GEOMORFOLOGÍA> <PENDIENTES> <COBERTURA VEGETAL> <ESTUDIO GEOLÓGICO GEOTÉCNICO> <SOFTWARE IP12WIN> <ARCGIS 10.1>
Fecha de publicación : 2014
Resumen : El presente proyecto de tesis está destinado al estudio de la susceptibilidad a deslizamientos, mismos que pueden afectar de una manera negativa a la estabilidad de vida de los pobladores y a los proyectos urbanísticos en ejecución en el Sector Menfis Central hasta el Barrio Obrapía, el mismo que se encuentra inmerso en la Parroquia Sucre, perteneciente al Cantón y Provincia de Loja. Para la ejecución de este estudio se realizó un conjunto de parámetros técnicos tanto en la obtención de los datos necesarios en el campo como la interpretación de los mismo en la oficina, entre los parámetros obtenidos en el campo, están: la topografía, geología, geomorfología y uso del suelo del sector, mientras que en la oficina se obtuvo el parámetro de ángulo de pendiente, también se llevó a cabo geofísica, específicamente sondeos eléctricos verticales (SEV), con el propósito de conocer la presencia de agua en el sector y la resistividad de los materiales para correlacionar o verificar la geología levantada anteriormente. Otro parámetro adicional fue el inventario de deslizamientos que se lo realizó con el fin de conocer el número de deslizamientos presentes en el sector tanto como sus medidas morfométricas, también sirvió para identificar las áreas afectadas por los mismos y las zonas que podrían verse afectadas por nuevos desates de deslizamientos. El proceso de asignación de pesos a las variables para el mapa de susceptibilidad se lo hizo por medio de la suma de rangos y valor esperado que corresponden al método estadístico, agrupando a las variables en las siguientes condiciones: intrínseca (geología, geomorfología y ángulo de pendiente) y biológica (Cobertura vegetal y área de influencia de la red hídrica). Ya en lo que se refiere a la interpretación de la susceptibilidad a deslizamientos se lo realizó con el resultado generado por medio del análisis de la condición intrínseca y bilógica procesados en el Software ArcGis 10.1, de esta manera se determinó las zonas del sector de estudio donde existe mayor o menor grado de susceptibilidad a deslizamientos. Para complementar el estudio y dar mayor peso a nuestros resultados obtenidos, se efectuó un estudio geológico – geotécnico del sector, para lo cual se realizó un ensayo de penetración estándar (SPT) a una profundidad de 6 metros, con el fin de conocer las propiedades geotécnicas de los materiales existentes, como es la capacidad portante de los materiales (q´ admisible), lo cual permitió proponer una metodología de cálculo al momento de determinar las dimensiones de los cimientos de cualquier obra ingenieril que se quiera llevar a cabo en este sector, así como también la metodología para calcular el factor de seguridad de un talud.
Descripción : The present thesis project is destined for the study of the susceptibility for slides, the same ones that they can affect in a negative way to the stability of life of the settlers and to the town-planning projects in execution in the Sector Menfis Central up to the neighborhood Obrapía, the same one that is immersed in the parish Sucre, belonging to the Canton and Province of Loja. For the execution of this study a set of technical parameters was realized so much in the securing of the necessary information in the field as the interpretation of the same in the office, between the parameters obtained in the field they are, the topography, geology, geomorphology and use of the soil of the sector, while in the office the earring angle parameter was obtained, also geophysics was carried out, specially vertical electrical opinion polls (SEV), with the intention of knowing the water presence in the sector and the resistivity of the materials to correlate or to verify the geology raised previously. Another additional parameter was the inventory of slides that realized it in order to know the number of present slides in the sector so much like its measurements morfométricos, also it served to know the areas affected by the same ones and the areas that might turn affected by new slides. In the process of making of the map of susceptibility the most suitable and accessible method was applied for the author, in this case the heuristic method, grouping to the variables in the following conditions: intrinsic (geology, geomorphology and angle of earring) and biological (Use of the soil and area of influence of the water network), for the allocation of the pesos in the analysis both for the variables and of two conditions we rest on the method of the sum of status and of the awaited value. Already as for the interpretation of the susceptibility to slides it is realized by the result generated by means of the analysis of the intrinsic and biological condition processed in the Software ArcGis 10. 1, this way one determined the areas of our sector of study where major or less susceptibility grade exists to slides. To complement the study and to give major weight to our obtained results, a geologic study was carried out – geotechnical of our sector, for which there was realized an test of standard penetration (SPT) to a 6 m depth, in order to know the properties geotechnical of the existing materials, since it is the capacity amble of the materials (q admissible), which allowed to propose a calculation methodology at the moment of determining the dimensions of the foundations of any work civil that it is about to carry out in this sector, as well as also the methodology to calculate the safety factor of a slope.
URI : http://dspace.unl.edu.ec/jspui/handle/123456789/14649
Aparece en las colecciones: TRABAJOS DE TITULACION AEIRNNR

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Castro Mendoza, Luis Estalin.pdf4,44 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.