Por favor, use este identificador para citar o enlazar este ítem: https://dspace.unl.edu.ec/jspui/handle/123456789/14452
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorVélez Ludeña, Wilson Augusto-
dc.contributor.authorJaramillo Ramírez, Magaly Elizabeth-
dc.contributor.authorSalazar Murillo, Yesenia Gabriela-
dc.date.accessioned2016-07-04T19:24:36Z-
dc.date.available2016-07-04T19:24:36Z-
dc.date.issued2010-
dc.identifier.urihttp://dspace.unl.edu.ec/jspui/handle/123456789/14452-
dc.descriptionThe present research work is based on the creation of a network simulating system and virtual routing. It is a tool for professionals, students from the systems and telecommunications area who want to venture into the field of data transmission networks, or those who simply want to acquire better skills at creating networks (networking). The system will have a friendly, graphic interface which will allow the user to move network devices such as Routers, Pc’s, switches to any place on the screen. It will allow to create networks according to the necessity, and it will allow to have physical connection through lines, and in this way to simulate the desired network. The network simulating system and virtual routing will be focused on the configuration of the router, that is to say, the system will have the capacity to set up the important characteristics of the router through well-known commands for the configuration of the router, CISCO brand, 2500 family. It will allow to set up each interface such as the Ethernet O, Serial O, Serial 1 as well as the routing table for the interface. The user of this system will be able to set up the NIC of the host, which is understood by the IP, mascara, gateway. The switch device will have the capacity of interacting as a layer 2 device, OSI model. In order to be able to verify that the configuration of the system is right, the system will foresee to enable test commands such as the ping command, trace router, and the Telnet command which allow us to verify if the data network is set up correctly. In this way, the network simulating system and virtual routing will allow the user to create his data network, do tests, and determine if its configuration is according to his necessities and convenience. The system will be able to present a report of the configurations of the routers and used hosts. Besides it will have the option to print such report to be presented to whom it may concern, as well as the printing of the data network. The system will have the capacity to continue growing with additional modules, that is, the system is intended to be approachable according to user’s necessities.es_ES
dc.description.abstractLa presente investigación se enmarca en la creación de un sistema simulador redes y ruteo virtual, es una herramienta para profesionales, estudiantes en el área de sistemas o telecomunicaciones que quieran incursionar en la rama de redes de transmisión de datos, o que simplemente quieran adquirir mejores destrezas al crear redes (Networking). El sistema tendrá una interfaz gráfica, amigable al usuario en el que permitirá mover dispositivos de red, ya sean estos Routers, Pc’s, Switches a cualquier lugar de la pantalla y permitirá crear redes de acuerdo a la necesidad y crear conexión física a través de líneas y de esta manera simular la red deseada. El sistema simulador de redes y ruteo virtual, estará enfocado a la configuración del router, es decir el sistema estará en la capacidad de configurar las características importantes del router mediante comandos conocidos para la configuración del Router marca CISCO familia 2500 y permitirá configurar cada interfaz como son la Ethernet 0, Serial 0, Serial 1 así como también la tabla de ruteo para la interfaz. El sistema estará en la capacidad de que el usuario configure los NIC de los host, siendo entendido esto por las IP, máscara, gateway. El dispositivo de Switch estará en la capacidad de interactuar como un dispositivo capa 2 de Modelo OSI. Para que el usuario esté en la capacidad de verificar que la configuración del mismo este correcta el sistema preverá habilitar comandos de pruebas como es el comando ping, tracerouter y el comando Telnet que permite verificar si la red de datos está configurada correctamente. De esta manera el sistema simulador de redes y ruteo virtual permitirá al usuario crear sus redes de datos, realizar pruebas y determinar si la configuración del mismo está de acuerdo a sus necesidades y conveniencia. El sistema estará en la capacidad de presentar un informe de las configuraciones de los Routers y Host utilizados, además tendrá la opción de imprimir dicho informe para la presentación a quien corresponda, así como también la impresión de redes de datos. El sistema estará en la capacidad de seguir creciendo con módulos adicionales es decir, el sistema está proyectado a ser escalable conforme a las necesidades del usuario.es_ES
dc.format.extent202 p.es_ES
dc.language.isospaes_ES
dc.rightsopenAccesses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-sa/3.0/ec/es_ES
dc.subject"<REDES DE DATOS> <ROUTERS> <REDES WAN> <TECNOLOGÍA NET> <BIBLIOTECAS DE CLASES> "es_ES
dc.titleSistema simulador de redes y ruteo virtual.es_ES
dc.typebachelorThesises_ES
Aparece en las colecciones: TRABAJOS DE TITULACION AEIRNNR

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Jaramillo Ramírez, Magaly Elizabeth, Salazar Murillo, Yesenia Gabriela.pdf5,77 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.