Por favor, use este identificador para citar o enlazar este ítem: https://dspace.unl.edu.ec/jspui/handle/123456789/24649
Título : Levantamiento geológico - estructural de la zona sur de la parroquia “La Tingue” perteneciente al cantón Olmedo, provincia de Loja a escala 1:10 000.
Autor : González Sisalima, Fermín Alexander
Jiménez Jiménez, Stalin Fernando
Palabras clave : <GEOLOGÍA ESTRUCTURAL>< LEVANTAMIENTO GEOLÓGICO>< MAPEO POR AFLORAMIENTOS>
Fecha de publicación : 25-mar-2022
Editorial : Universidad Nacional de Loja
Resumen : La parroquia la Tingue está ubicada al Sur del territorio ecuatoriano, al Norte de la provincia de Loja y al Este del cantón Olmedo al que pertenece, esta parroquia tiene una superficie de 51,49km2, de los cuales 25.74km2 conforman La Tingue Sur que es la zona de estudio. Esta área de investigación está limitada geográficamente al Norte con la división La Tingue Norte, al Este la parroquia Zambi y al Sureste con la parroquia San Pedro De La Bendita, parroquias pertenecientes al cantón Catamayo, al Sur limita con la parroquia Catacocha del cantón Paltas, y al Oeste con la parroquia Olmedo del cantón Olmedo. Con el levantamiento geológico - estructural de la zona Sur de la parroquia La Tingue a escala 1:10 000 se llega a caracterizar siete Unidades litológicas: Unidad Celica, Unidad Bramaderos, Unidad Catacocha, Unidad Zambi, Unidad Yunguilla, Subvolcánico y Depósito Coluvial. La Unidad Celica es la más extensa con 8.41km2 y a su vez constituye el basamento de la zona de estudio, esta unidad litológica aflora en los sectores Aguasillas y Yacuma, se encuentra compuesta por andesitas (lavas andesíticas) y toba (toba cristalina). La Unidad Bramaderos aflora en los sectores Aguasillas, Guayuro, Tambara Bajo y Chivatos, ocupando 4.83km2, está formada por toba volcánica (toba cristalina) y aglomerado volcánico. La Unidad Catacocha se emplaza en los sectores Cola, Chivatos y Yacuma, con una superficie de 4.21km2, está compuesta por toba masiva (toba cristalina), andesita (asociada a cuellos volcánicos) y brecha volcánica. La Unidad Zambi se ubica en los sectores Tambara, Guayuro y Lobongo, extensionalmente ocupa 5.11km2, está compuesta de lutita, metalutita y limolita. La Unidad Yunguilla, se ubica en los sectores Aguasillas y Cola, ocupa 1.39km2, y está formada por limolitas. El Subvolcánico se ubica en el sector Aguasillas en una superficie de 0.39km2, este cuerpo hipoabisal es de composición andesítica. Finalmente, el Depósito Coluvial ubicado en el sector Guayuro, ocupa 1.40km2 de superficie, está compuesto de fragmentos andesíticos soportados en una matriz limosa. En cuanto a la geología estructural, se identificó mediante la fotointerpretación y el levantamiento en campo de todos los afloramientos estructuras importantes en la zona de estudio, como: pliegues anticlinales, diaclasas con distintas direcciones y buzamientos, y 7 fallas geológicas, de las cuales 6 son inferidas y 1 es observada, la más representativa es una falla dextral inferida que cruza toda la zona de estudio en sentido S-N. Palabras clave: geología estructural, levantamiento geológico, mapeo por afloramientos.
Descripción : La Tingue parish is located in southern Ecuadorian territory, north of the province of Loja and east of the Olmedo canton to which it belongs. This parish has an area of 51.49km2, of which 25.74km2 make up La Tingue Sur, which is the study area. This research area is geographically limited to the north by La Tingue Norte division, to the east by Zambi parish and to the southeast by San Pedro De La Bendita parish, parishes belonging to Catamayo county, to the south by Catacocha parish of Paltas county, and to the west by Olmedo parish of Olmedo county. With the geological-structural survey of the southern zone of La Tingue parish at a scale of 1:10,000, seven lithological units have been characterized: Celica Unit, Bramaderos Unit, Catacocha Unit, Zambi Unit, Yunguilla Unit, Subvolcanic Unit and Colluvial Deposit. The Celica Unit is the largest with 8.41km2 and is the basement of the study area. This lithological unit outcrops in the Aguasillas and Yacuma sectors and is composed of andesites (andesitic lavas) and tuff (crystalline tuff). The Bramaderos Unit outcrops in the Aguasillas, Guayuro, Tambara Bajo and Chivatos sectors, occupying 4.83km2 and is composed of volcanic tuff (crystalline tuff) and volcanic agglomerate. The Catacocha Unit is located in the Cola, Chivatos and Yacuma sectors, with an area of 4.21km2, and is composed of massive tuff (crystalline tuff), andesite (associated with volcanic necks) and volcanic breccia. The Zambi Unit is located in the Tambara, Guayuro and Lobongo sectors; it occupies an extensional area of 5.11km2 and is composed of shale, metallutite and siltstone. The Yunguilla Unit is located in the Aguasillas and Cola sectors, occupies 1.39km2, and is formed by siltstones. The Subvolcanic Unit is located in the Aguasillas sector in an area of 0.39km2, this hypoabyssal body is of andesitic composition. Finally, the Colluvial Deposit located in the Guayuro sector, occupies an area of 1.40km2 and is composed of andesitic fragments supported in a silty matrix. Regarding the structural geology, important structures in the study area were identified through photo interpretation and field survey of all outcrops, such as: anticlinal folds, diaclases with different directions and dips, and 7 geological faults, of which 6 are inferred and 1 is observed, the most representative is an inferred dextral fault that crosses the entire study area in a S-N direction. Key words: structural geology, geological survey, outcrop mapping.
URI : https://dspace.unl.edu.ec/jspui/handle/123456789/24649
Aparece en las colecciones: TRABAJOS DE TITULACION AEIRNNR

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
StalinFernando_JiménezJiménez.pdf6,38 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.