Por favor, use este identificador para citar o enlazar este ítem: https://dspace.unl.edu.ec/jspui/handle/123456789/23904
Título : Diseño de un sistema de riego por aspersión en el cultivo de maíz (zea mays) en el predio agrícola “El Almendro” del barrio la vega, parroquia y cantón Catamayo, provincia de Loja
Autor : Vásquez, Edison Ramiro
Guamán Zhingre, Maribel Andreina
Palabras clave : RIEGO
RIEGO POR ASPERSIÓN
SUELO
Fecha de publicación : 21-mar-2021
Editorial : Loja
Resumen : En el predio agrícola “El Almendro” del barrio La Vega, parroquia y cantón Catamayo, provincia de Loja, se realizó el diseño de un sistema de riego por aspersión en el cultivo de maíz (Zea mays) para una superficie de 0,58 ha. El objetivo principal es de contribuir al manejo integral de los predios dedicados a la agricultura familiar campesina del sector, mediante el diseño de un sistema de riego presurizado; para el cual se realizó la evaluación física del suelo, en donde se tomaron muestras no disturbadas con la ayuda de los cilindros Koppecky de 100 cm3, y muestras alteradas, a una profundidad de 40 cm respectivamente. Para el diseño agronómico, se determinó, las necesidades de riego del cultivo de maíz, donde se empleó el método indirecto Penman- Monteith propuesto por la FAO para la obtención de la ETo, el cual se efectuó con base a datos climáticos (altitud, latitud, longitud, temperatura máxima y mínima, humedad relativa, velocidad del viento y heliofanía) de la estación meteorológica Catamayo, y a partir de los datos obtenidos por Ureña (2016) se graficó la curva del kc, que se utilizaron para el cálculo de la evapotranspiración del cultivo. A partir de los resultados de análisis de las propiedades físicas del suelo (densidad aparente, capacidad de campo, punto de marchitez permanente, textura, velocidad de infiltración, profundidad efectiva) se determinó, la lámina de riego de 53,64 mm; la frecuencia de riego de 7 días; y, el tiempo de riego de 7 horas. En el diseño hidráulico, se determinó la red hidráulica principal, secundaria o múltiple y lateral, con diámetros nominales de 3”, 3” y 1 ½”, respectivamente, mismas que fueron diseñadas a través de la fórmula de Hazen-Williams; además, se estimó el coeficiente de Christiansen para las tuberías con multisalidas. Finalmente, se seleccionó la motobomba Honda WH20X de 5,5 HP, con una presión máxima de 42,84 mca. Palabras claves: RIEGO POR ASPERSIÓN, diseño agronómico, diseño hidráulico, coeficiente de Christiansen.
Descripción : In the “El Almendro” agricultural property of La Vega neighborhood, Catamayo parish and canton, Loja province, was designed a sprinkler irrigation system for the cultivation of corn (Zea mays) for an area of 0.58 ha. The main objective is to contribute to the integral management of the properties dedicated to peasant family agriculture in the sector, through the design of a pressurized irrigation system; for which, was done the physical evaluation of the soil, where were taken undisturbed samples with the help of Koppecky cylinders of 100 cm3, and altered samples, at a depth of 40 cm respectively. For the agronomic design, were determined the irrigation needs of the corn crop, where was used the indirect Penman-Monteith method proposed by FAO to obtain the ETo, which was carried out based on climatic data (altitude, latitude, length, maximum and minimum temperature, relative humidity, wind speed and heliophany) of the Catamayo meteorological station, and from the data obtained by Ureña (2016) was graphed the kc curve, which was used to calculate evapotranspiration of the crop. From the results of the analysis of the physical properties of the soil (apparent density, field capacity, permanent wilting point, texture, infiltration speed, effective depth), was determined the irrigation sheet of 53.64 mm; the frequency of irrigation of 7 days; and, the watering time of 7 hours. In the hydraulic design, was determined the main, secondary or multiple and lateral hydraulic network, with nominal diameters of 3”, 3” and 1 ½”, respectively, which were designed through the Hazen-Williams formula; in addition, was estimated the Christiansen coefficient for pipes with multi-outlets. Finally, was selected the 5.5 HP Honda WH20X motor pump, with a maximum pressure of 42.84 mwc. Keywords: sprinkler irrigation, agronomic design, hydraulic design, Christiansen coefficient.
URI : https://dspace.unl.edu.ec/jspui/handle/123456789/23904
Aparece en las colecciones: TRABAJOS DE TITULACION AARNR

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Maribel Andreina Guamán Zhingre.pdf3,04 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.