Por favor, use este identificador para citar o enlazar este ítem: https://dspace.unl.edu.ec/jspui/handle/123456789/18007
Título : Simulación de circuitos de acoplamiento con carga resistiva en corriente continua, mediante el uso del SOFTWARE MULTISIM.
Autor : Yunga Herrera, Luis Alberto
Macanchí Jiménez, Darwin Efrén
Palabras clave : <SIMULACIÓN DE CIRCUITOS><NI MULTISIM 11.0><CARGA RESISTIVA><CORRIENTE CONTINUA><SOFTWARE MULTISIM>
Fecha de publicación : 2012
Resumen : El tema elegido para elaborar este trabajo es ″SIMULACIÓN DE CIRCUITOS DE ACOPLAMIENTO CON CARGA RESISTIVA EN CORRIENTE CONTINUA, MEDIANTE EL USO DEL SOFTWARE MULTISIM”, previo a la obtención del grado de tecnólogo en electricidad y control industrial. Dicho tema fue elegido y desarrollado siguiendo los parámetros establecidos por la universidad para de esta forma satisfacer las inquietudes del estudiante sobre el manejo de este software muy importante para el buen desempeño profesional. Para satisfacer todas estas inquietudes me propuse dos objetivos generales: Simular circuitos con cargas resistivas en corriente continua médiate el uso del software Multisim, y, realizar una guía de prácticas acordes a la normativa institucional, en donde se describan los resultados de la simulación. Dichos objetivos fueron cumplidos al final de este trabajo, y para poder llegar a esta meta propuesta tuve dos métodos como herramienta principal estos son: El método analítico, porque descomponemos nuestras idea sobre las simulaciones ¿De qué se trata?, ¿Cómo funcionan?, ¿para qué nos sirven? Todo esto para poder entenderla y explicarla. Y otro método muy importante y muy utilizado es el método experimental por medio del cual se trató de explicar la relación entre causa-efecto es decir por medio de la simulación se demostró el funcionamiento de ciertos circuitos, así también se utilizó la técnica de la observación, esta técnica sirvió de mucho para poder verificar circuitos eléctricos y aplicarlos en las simulaciones con el software Multisim. Cada práctica está con todos los puntos correspondientes: Tema, Objetivos, Materiales y Equipos, Esquemas, Sistema Categorial, Desarrollo, Preguntas de Control y Bibliografía. Este trabajo también contiene las respectivas conclusiones basadas en los objetivos generales y de las prácticas que más se destacan, y recomendaciones sobre el uso de este software, y al final de la misma.
Descripción : Is the elected topic to elaborate this work? SIMULATION OF CIRCUITS OF JOINING WITH LOAD RESISTIVA IN CONTINUOUS CURRENT, BY MEANS OF THE USE OF THE SOFTWARE MULTISIM", previous to the obtaining of technologist's grade in electricity and industrial control. This topic was chosen and developed following the parameters settled down by the university for this way to satisfy the student's restlessness on the handling of this very important software for the good acting professional. To satisfy all these restlessness I intended two general objectives: To simulate circuits with loads resistivas in continuous current mediates you the use of the software Multisim, and, to carry out a guide of in agreement practices to the normative one institutional where the results of the simulation are described. This objectives were completed at the end of this work, and to be able to arrive to this proposed goal I had two methods like main tool these they are: The analytic method, because we decompose our idea on the simulations what is it?, How do they work?, for what reason do they serve us? All this to be able to understand it and to explain to it. And another very important and very used method is the experimental method by means of which was to explain the relationship that is to say among cause-effect by means of the simulation the operation of certain circuits it was demonstrated, likewise the technique of the observation, this technique was used it served of a lot to be able to verify electric circuits and to apply them in the simulations with the software Multisim. Each practice is with all the corresponding points: Fear, Objectives, Materials and Teams, Outlines, System Categorical, Development, Questions of Control and Bibliography. This work also contains the respective conclusions based on the general objectives and of the practices that more they stand out, and recommendations on the use of this software, and at the end of the same one.
URI : http://dspace.unl.edu.ec/jspui/handle/123456789/18007
Aparece en las colecciones: TRABAJOS DE TITULACION AEIRNNR

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Macanchí Jiménez, Darwin Efrén.pdf4,25 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.