Por favor, use este identificador para citar o enlazar este ítem: https://dspace.unl.edu.ec/jspui/handle/123456789/13599
Título : Vivienda de interés social de dos plantas en base a tapial como una alternativa para el barrio "Mirador" situada en la parroquia de Malacatos, ciudad de Loja: materiales y estructuras.
Autor : Gahona Pacheco, Jorge Enrique
Febres Torres, Byron Roberto
Palabras clave : <TAPIAL><ESTABILIZACIÓN DEL SUELO><CARACTERÍSTICAS ARQUITECTÓNICAS><CARACTERÍSTICAS ESTRUCTURALES>
Fecha de publicación : 2011
Resumen : VIVIENDA DE INTERÉS SOCIAL DE DOS PLANTAS EN BASE A TAPIAL COMO UNA ALTERNATIVA PARA EL BARRIO “MIRADOR” SITUADA EN LA PARROQUIA DE MALACATOS, CIUDAD DE LOJA: MATERIALES Y ESTRUCTURAS La técnica conocida como tapia, tapial, tapia pisada o tierra apisonada, trata de un sistema en el que la transformación del suelo y la edificación constituyen un mismo proceso, por lo que la selección de la materia prima y la organización del trabajo son piezas clave. Se tienen evidencias de construcciones de tapias desde hace milenios en regiones tan distantes como la India, China, Egipto, Siria, Líbano, Bolivia, Perú y Ecuador. La construcción del Estado del Arte permitió observar que en el Ecuador no existen viviendas de dos Plantas construidas en base al Tapial, cuando es precisamente este tipo de vivienda la que marca el objeto fundamental de esta investigación. En consecuencia, y habiendo revisado la literatura internacional que aborda el tema objeto de estudio. En la presente investigación bajo la Hipótesis de que el conocimiento ancestral de los pobladores de la Comuna de Malacatos acerca de la construcción con tierra, las propiedades físico mecánicas de los suelos de dicha región y el ejercicio creativo en la aplicación de tecnologías apropiadas para diseñar y construir muros de tapia, hace posible que se puedan construir viviendas de dos Plantas en el País en general, y en la Comuna Malacatos en particular. Para este efecto, en la presente investigación se han propuesto modelos para el diseño estructural de muros de tapial estabilizados con cemento y reforzado con varillas de acero, mediante los cuales se pueda determinar el espesor de un muro para viviendas de dos Plantas construido con este material, de manera que admita la carga correspondiente a estas dos Plantas sin rebasar las bases de diseño de los estados límites de servicio y de resistencia. A la vez describir las tecnologías de construcción más apropiadas para ejecutar dichos muros.
Descripción : HOUSING OF SOCIAL INTEREST OF TWO FLOORS BASED ON TAPIAL LIKE AN ALTERNATIVE FOR THE NEIGHBORHOOD "MIRADOR" LOCATED IN THE PARISH OF MALACATOS, LOJA CITY: MATERIALS AND STRUCTURES The well-known technique as wall, tapial, walls footfall or rammed earth, it is about a system in which the transformation of the floor and the construction constitute oneself process, for what the selection of the matter prevails and the organization of the work is pieces key. Evidences of constructions of walls are hard for millennia in regions so distant as the India, China, Egypt, Syria, Lebanon, Bolivia, Peru and Ecuador. The construction of the State of the Art allowed to observe that in the Ecuador housings of two built Plants don't exist based on the Tapial, when it is in fact this housing type the one that marks the fundamental object of this investigation. In consequence, and having revised the international literature that approaches the topic study object. In the present investigation under the Hypothesis that the ancestral knowledge of the residents of the Commune of Malacatos about the construction with earth, the properties physique mechanics of the floors of this region and the creative exercise in the application of appropriate technologies to design and to build wall walls, they make possible that housings of two Plants can be built in the Country in general, and in the Commune Malacatos in particular. For this effect, in the present investigation models have intended for the structural design of tapial walls stabilized with cement and reinforced with steel bar, by means of which you can determine the thickness of a wall for housings of two Plants built with this material, so that it admits the load corresponding to these two Plants without surpassing the bases of design of the states limits of service and of resistance. At the same time to describe the most appropriate construction technologies to execute this walls.
URI : http://dspace.unl.edu.ec/jspui/handle/123456789/13599
Aparece en las colecciones: TRABAJOS DE TITULACION AEIRNNR

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
Febres Torres, Byron Roberto (2).pdf2,15 MBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.